Mixing Instructions

Mixing Instructions

Suggested mixing instructions.  Some tips, always start with smaller batches and scale up from there.  Always start slow! You can always add more, but you can’t take away.  Our terpenes are highly concentrated, so a little goes a long way.  Some products may need to sit for up to 24 hours for best results.  Need help mixing another product not listed?  Reach out to us and we’ll be glad to help!

web mixing instruction ratio icon

CARTRIDGES

With Liquify Pro:

Starting Point: 1% by volume and work up from there. Recommended at 5%.

Example: 9g Distillate/ Clear + 0.5g Terpenes/ Flavors + 0.5g Liquify Pro

 

Without Liquify Pro:

Starting Point: 1% by volume and work up from there. Recommended at 5%.

Example: 9.5g Distillate/ Clear + 0.5g Terpenes/ Flavors

web mixing instruction lotion icon

LOTIONS AND COSMETICS

Starting point:
1% terpenes by weight.

Example:
1 ounce of lotion (28 grams), add 0.28 grams of terpenes

web mixing instruction wax icon

SHATTER, WAX, ROSIN, ETC.

Starting point:
1% by weight.

Example:
2 grams of product,
add 0.02 grams
(Approximately 1-2 drops with our provided dropper)

web mixing instruction isolate icon

ISOLATE (UNFLAVORED)

Starting point:
2% by weight.

Example:
1 gram of product, add 0.02 grams (Approximately 1-2 drops with our provided dropper)

web mixing instruction beverages icon

SPARKLING WATER, CHAMPAGNE, BEVERAGES, ETC.

Starting point:
4 drops per Liter

Example:
1 bottle of champagne, add 1-2 drops of your favorite flavor

web mixing instruction edibles icon

EDIBLES

Starting point:
Depending on the edible,
start with 0.5% by weight and adjust accordingly.

Example:
Hard candy batch weighing 14 grams,
add 0.07 grams of terpenes.

web mixing instruction flower icon

FLOWER

Starting point:
1% by weight.

Example:
1 gram of product, add 0.01 grams
(Approximately 1 drop with our provided glass dropper)

Instructions:
Spray buds lightly and evenly using a pump mist sprayer that does not fully saturate the flower and gently toss in an enclosed container to cure.
(Always use glass or an approved HDPE plastic sprayer to avoid undesirable reactions.)

web mixing instruction flower icon

FLOWER

Starting point:
1% by weight.

Example:
1 gram of product, use 0.01 grams
(Approximately 1 drop with our provided dropper)

Instructions:
Spray buds lightly and evenly using a pump sprayer that does not fully saturate the flower and gently toss in an enclosed container to cure.
(Always use glass or an approved HDPE plastic sprayer to avoid undesirable reactions.)

Search Our Products

Skip to content